Ardex
About Ardex
ARDEX delivers industry leading innovation and time-tested, consistent solutions to the most complex installation problems for concrete repair and resurfacing, substrate preparation, flooring installation or for setting natural stone, ceramic tile and many other types of flooring materials. They ensure the job gets done right the first time, every time, to specification and on schedule, minimizing risk and costly callbacks.
Read MoreARDEX EP 2000™
Substrate Preparation Epoxy PrimerARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings. It is especially suited to prime concrete and other structurally sound and solid substrates, including terrazzo, epoxy coatings and ceramic and quarry tile, prior to installing ARDEX products.
ARDEX FEATHER FINISH®
Self-Drying, Cement-Based Finish UnderlaymentARDEX FEATHER FINISH®is a trowelable underlayment that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s most demanding floor coverings. It has a superior coverage of up to 300 sq. ft. per bag and allows the installation of floor coverings in as little as 15minutes.
ARDEX FORTI FINISH™
High Strength, Self-Drying, Finishing UnderlaymentARDEX FORTI FINISH™ is a self-drying, cement-based, polymer modified, trowel-grade underlayment that provides a smooth, highly durable finish for use over concrete substrates prior to the installation of vinyl and other floor coverings in the most demanding environments. Developed specifically for use in hospitals where heavy rolling loads are common, ARDEX FORTI FINISH allows the installation of most types of floor covering in as little as 15 to 30 minutes over concrete and prepared adhesive residues on concrete.
ARDEX GPS™
General Patch & SkimcoatARDEX GPS™ General Patch & Skimcoat is a trowelable patch and skim coat for use over interior concrete, wood, ceramic tile, and cutback and other non-water soluble adhesive residues on concrete. ARDEX GPS can also be used over vinyl composition tile (VCT) and as an embossing filler for residential sheet vinyl when mixed with ARDEX E 25™ Resilient Emulsion. ARDEX GPS will provide a permanent, smooth, durable finish prior to the installation of residential and most commercial floor coverings. ARDEX GPS hardens quickly, is easy to apply, dries fast without shrinking, cracking or palling, and does not need to be sanded.
ARDEX K 10™
Reactivatable™, High-Flow, Self-Leveling UnderlaymentA reactivatable, high-flow, self-leveling underlayment that is used to smooth prior to the installation of finished flooring. When installed using a spiked roller, ARDEX K 10 has a healing time of up to 25 minutes. Pourable or pumpable.
ARDEX K 13™
Premium Self-Leveling UnderlaymentChoose Faster Dry Time! ARDEX K 13™ installs up to 1” (2.5 cm) even in larger areas. Install floor coverings in just 16 hours. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residue on concrete.
ARDEX K 15®
Premium Self-Leveling UnderlaymentChoose the Benchmark! ARDEX K 15® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.
ARDEX K22 F™
High Flow, Fiber Reinforced Self-Leveling UnderlaymentARDEX K 22 F™ is high flow for easy installation, low prep, and fiber reinforced. It is used to repair existing above-grade floors and can be used over a variety of substrates including properly prepared wood and gypsum. Apply from 1/8" to 1 1/4" neat and up to 2" with aggregate. Install floor covering in as little as 24 hours.
ARDEX K 60™ ARDITEX
Rapid Setting Latex Smoothing and Leveling CompoundIt is a self-smoothing, trowelable, latex leveling compound with excellent adhesion, flexibility and moisture resistance. ARDEX K 60 can be used on a variety of substrates to include wood and steel. For most applications, no mechanical profiling or priming is required.
ARDEX K 301™
Exterior Self-Leveling Concrete ToppingARDEX K 301™ is a self-leveling Portland cement-based topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete, porous tile and certain non-porous surfaces when properly prepared – on, above or below grade. ARDEX K 301 can be sealed to create a concrete wear surface for commercial, light industrial and residential applications, including storage rooms, workshops, parking garages, parking decks, driveways, patios and plazas. It can also be used as an underlayment for finish flooring, as well as on permanently wet areas and under moisture remediation systems such as the ARDEX Moisture Control Systems.
ARDEX K 520™
Self-Leveling Concrete ToppingARDEX K 520™ is a self-leveling, topping for fast-track resurfacing, smoothing or leveling of indoor concrete and certain non-porous surfaces. ARDEX K 520 can be installed up to 1" (25 mm) thick neat and up to 3" (7.5 cm) thick with the addition of appropriate aggregate. Use ARDEX K 520 in warehouses, utility rooms and light manufacturing areas to provide a hard, flat, smooth surface that can be sealed. Also use over concrete and terrazzo substrates in areas that require a polished surface. Sealing or polishing can proceed in as little as 24 hours.
ARDEX K 521™
Self-Leveling Concrete Topping with Aggregate SurfaceARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8" (9 mm) up to a maximum thickness of 2" (5 cm). Use ARDEX K 521 to provide a polished, “aggregate-exposed” surface. Polishing can proceed in as little as 24 hours.
ARDEX MRP™
Moisture Resistant Patch for Concrete to receive ARDEX Moisture Control SystemsARDEX MRP™ is a trowel-grade, cementitious patching and smoothing compound for filling and repairing heavily profiled indoor concrete on all grade levels prior to the installation of ARDEX Moisture Control Systems. Engineered with Portland cement and select high-performance polymers, ARDEX MRP bonds readily to concrete surfaces. It produces a surface finish without having to re-profile the surface of the patch after it is installed.
ARDEX P 51™
PrimerARDEX P 51™ is a solvent-free primer for the installation of ARDEX underlayments and toppings over absorbent concrete. For specialized applications and with select underlayments, ARDEX P 51 also can be used for priming wood, gypsum and non-water soluble adhesive residue over concrete.
ARDEX P 82™
Ultra PrimeA high-strength, solvent-free primer for the installation of ARDEX underlayments over smooth, non-absorbent substrates, such as ceramic, quarry and porcelain tile, terrazzo and metal decking, as well as wood subfloors and non-water-soluble adhesive residues on concrete.
ARDEX SD-M™
Designer Floor Finish™ARDEX SD-M™ is a self-drying, Portland cement-based, trowelable topping for fast track finishing or resurfacing of interior concrete and certain non-porous surfaces. Use ARDEX SD-M to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. ARDEX SD-M can also be installed to create ARDEX DESIGNER FLOORS™ in areas such as retail, hospitality, lobbies, stores, and all interiors requiring such a surface. ARDEX SD-M can be installed at a minimum thickness of only 20 mils (0.020”), minimizing height transition issues, and can be sealed in as little as 2 hours.
ARDEX SD-P®
Self-Drying, Trowelable Concrete UnderlaymentFast setting patch for smoothing and repairing indoor concrete floors, ramps and stairways, as well as non-porous substrates such as terrazzo, ceramic and quarry tile, prior to the installation of floor covering.
ARDEX SD-P® RAPID
Self-Drying, Trowelable Concrete UnderlaymentFast setting patch for smoothing and repairing indoor concrete floors, ramps and stairways, as well as non-porous substrates such as terrazzo, ceramic and quarry tile, prior to the installation of floor covering.
Tech Data SheetARDEX SD-T®
Self-Drying, Self-Leveling Concrete ToppingARDEX SD-T® is a self-drying, self-leveling, no troweling topping for fast track resurfacing, smoothing or leveling of indoor concrete. ARDEX SD-T® hardens fast due to its unique self-drying formulation – it can be sealed in as little as 2 hours depending on the sealer type, and opened to traffic as soon as the sealer has fully dried. Use ARDEX SD-T to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. ARDEX SD-T® can also be installed in areas such as retail stores, television studios and all interiors requiring such a surface.
Tech Data SheetARDEX SKM™
Skim Finish - Skimcoat Patch & Finishing UnderlaymentARDEX SKM™ is a trowelable underlayment ideally suited for skim coat applications over large areas. It provides a permanent, smooth, durable finish prior to the installation of most floor coverings. It hardens quickly, is easy to apply and dries fast without shrinking, cracking or spalling.
Tech Data SheetARDEX V 1000™
Self-Leveling UnderlaymentARDEX V 1000™ is a blend of Portland cements, other hydraulic cements and polymers that is used to level and smooth interior concrete and cementitious terrazzo prior to the installation of finished flooring – on, above or below grade. It also can be installed over concrete treated with certain curing compounds (see below). Pourable or pumpable when mixed with water, ARDEX V 1000 seeks its own level and provides a durable, flat, smooth floor surface with minimum labor.
Tech Data SheetARDEX V 1200™
Self-Leveling UnderlaymentARDEX V 1200™ is used to level and smooth interior substrates prior to the installation of finished flooring. Apply from 1/4" to 1 1/4" neat. Dry to install most flooring in 24 or less. Pourable or pumpable.
Tech Data SheetHenry
About Henry
The W.W. Henry Company is one of the world’s largest manufacturers of adhesives for all types of flooring installations.
Read MoreHENRY® 256™
Dual Purpose Carpet & Sheet Flooring AdhesiveHENRY® 256 is a premium professional grade multi-purpose adhesive making it an excellent choice for a wide variety of carpet and felt-back sheet vinyl installations.
HENRY® 170 “The General”™
Multipurpose Flooring AdhesiveHENRY® 170 ‘The General’ is a multipurpose adhesive designed for the installation of commercial carpet in light traffic areas like property management and tenant improvement areas. It can also be used for the installation of residential felt-backed sheet flooring.
HENRY® 650 R
Pressure Sensitive AdhesiveHENRY® 650 R is a versatile adhesive offering releasable or permanent bonding properties that will firmly adhere a range of today's most in-demand flooring materials. Ideal for minimizing future demo work on properties that undergo frequent flooring renovation.
HENRY 430 ClearPro™
Clear VCT Floor AdhesiveHENRY 430 ClearPro is a best-in-class VCT adhesive that features a short open time and 24 hours of working time. This adhesive provides immediate outstanding bond strength and resists concrete moisture vapor emissions as high as 90% RH per ASTM F2170.
HENRY® 440
Cove Base AdhesiveHENRY® 440 is a high-performance adhesive requiring no "open time". A very aggressive initial gab prevents slippage during the installation of vinyl and rubber wall base materials.
HENRY® 1171N SureLock™
Acrylic Urethane Wood Flooring AdhesiveHENRY 1171N Surelock is a premium grade adhesive with excellent initial "green grab" and fast strength development characteristics. Designed to prevent cupping, peaking and end-lifting during installation.